Rodent Versa-Rack Assembly Guide
It’s time to set up your new Rodent Versa-Rack!
Before you begin, please read the Important Notes below.
Important Notes
- To build your rack, you may download our printable PDF instructions.
- You may also use the assembly videos below as visual aids to build your rack.
- Follow each step in order. Deviating may cause issues later on.
- Easily assembled by one or two adults.
- Gloves not required, but may be worn for additional safety.
- Refer to your physical Packing List and Sales Receipt for part quantities.
- If using the 90lb-rated casters on your rack, place the included washer provided with your rack onto each caster stud before threading into the pole.
- If parts are missing or damaged, please contact our support team.
Assemble Your Rack
We are still working to complete the video assembly instructions for the Rodent Versa-Rack. However, we do have detailed videos of similar racks that will greatly aid in assembling your Rodent Versa-Rack and accessories.
This video is for the SSS Versa-Rack. The basic rack assembly is the same, with a few key differences:
- If your Rodent Versa-Rack has:
- Shallow tubs, use (1) 3.5-inch spacer between the ABS shelf and food tray.
- Standard tubs, use (1) 5.375-inch spacer.
- 2x tubs, use (2) 5.375-inch spacers.
- 3x tubs, use (3) 5.375-inch spacers.
- Always use a 3.5-inch spacer between the top of a food tray and the bottom of an ABS shelf.
- If your Rodent Versa-Rack has a supply shelf:
- Use (3) 5.375-inch spacers between the top of the ABS supply tray and the bottom of your first ABS tub support shelf.
Watch from 0:45 – 9:44
Add Your Accessories
This video is for the Ultra Rack, but the installation of the accessories is the same as your Versa-Rack.
- Relevant accessories covered in this video:
- Front and Back Stops (19:39 – 21:19)
- Food tray dividers (21:55 – 23:24)
- Water Container Pedestal Holder (25:32 – 26:07)
- Vision Watering System (26:22 – 31:11)
- Food Hopper (31:33 – 31:50)
Watch From 19:39 – 31:50
Trouble with Assembly?
If parts are missing or damaged, or if you have general assembly questions, please contact us!